BGNPW - 32N181 SILICONE LUBE
- MSDS: BGNPW
- Manufacturer: SPC TECHNOLOGY
- Product Name: 32N181 SILICONE LUBE
- National Stock Number: 6850-01-139-4040
Product Identification
Product ID:32N181 SILICONE LUBE
MSDS Date:01/01/1987
FSC:6850
NIIN:01-139-4040
MSDS Number: BGNPW
Responsible Party
BENSENVILLE, IL 60106-1713
US
Emergency Phone: NONE
Cage: 12341
Contractor
Cage: 63590
Ingredients
DICHLORODIFLUOROMETHANE (SARA III)
CAS: 75-71-8
RTECS: PA8200000
Fraction By Weight: 50.0%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TRICHLOROFLUOROMETHANE (CFC-11) (SARA III)
CAS: 75-69-4
RTECS: PB6125000
Fraction By Weight: 45.0%
OSHA PEL 1000 PPM
ACGIH TLV: C, 1000 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
SILICON FLUID
CAS: 63148-62-9
Hazards
Effects of Overexposure:POSSIBLE DIZZINESS OR
NAUSEA,DROWSINESS,DIFFICULT BREATHING,FROSTBITE,PARALYSIS IN HIGH
CONCS.
First Aid
First Aid:INHALATION:REMOVE VICTIM TO NON-CONTAMINATED AREA & APPLY
"CPR" IF BREATHING HAS STOPPED,CALL A DOCTOR IMMEDIATELY;OXYGEN
INHALATION MAY BE UTILIZED.SKIN:IF FROSTBITE HAS OCCURRED,FLUSH
AREA WITH WARM WATER.
Fire Fighting
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS,USE
H*2O TO COOL CANS
Unusual Fire/Explosion Hazard:DO NOT SPRAY NEAR OPEN FLAME.KEEP AT ROOM
TEMP.AS HEAT OR DIRECT SUNLIGHT MAY CAUSE BURSTING.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION,VENTILATE.AVOID
BREATHING OF VAPORS & REMOVE WITH INERT ABSORBENT.STOP LEAK IF YOU
CAN DO SO WITHOUT RISK
Handling
Handling and Storage Precautions:PROTECT CONTAINERS FROM PHYSICAL
DAMAGE.DO NOT STORE ABOVE 120F.KEEP AT ROOM TEMPERATURE AS EXPOSURE
TO DIRECT SUNLIGHT OR OTHER HEAT MAY CAUSE BURST.
Other Precautions:DO NOT PUNCTURE OR INCINERATE.DO NOT SPRAY NEAR FIRE
OR OPEN FLAME.KEEP AWAY FROM CHILDREN.WEAR RUBBER GLOVES,SAFETY
GLASSES.AVOID SKIN CONTACT.DO NOT BREATHE VAPORS.ADEQUATE
VENTILATION.
Exposure Controls
Respiratory Protection:AVOID BREATHING OF VAPOR OR SPRAY MIST;USE
SELF-CONTAINED BREATHER
Ventilation:LOCAL EXHAUST IS RECOMMENDED.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
MSDS DATED 6-27-85. ITEM HAS TWO PART NUMBERS:(1)SILICONE LUBE 32N 181,
AND (2)OOZ-242.
Chemical Properties
HCC:V2
Boiling Pt:B.P. Text:<0F,PROPELL
Vapor Pres:45
Vapor Density:>1.0
Evaporation Rate & Reference:>1.0,ETHER
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS GAS,FAINT ODOR.
Percent Volatiles by Volume:95.0
Stability
Stability Indicator/Materials to Avoid:YES
ALKALI METALS,VARIOUS METAL POWDERS,MG,& ITS ALLOYS,NA,K,AL
Stability Condition to Avoid:DO NOT STORE ABOVE 120F.
Hazardous Decomposition Products:BY OPEN FLAME:FUMES MAY CONTAIN CO &
TOXIC FUMES FLUORS & CL
Disposal
Waste Disposal Methods:DO NOT INCINERATE-DISPOSE IN ACCORDANCE WITH
FEDERAL,STATE & LOCAL REGULATIONS REGARDING POLLUTION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.